![]() That's nice since it reduces the maintenance for a car that is not driven much. Pixel speedrun 76, American heritage leather furniture near me. Do I take the risk of going all the way back to green? or a safer bet and use HOAT which seems like a reasonable compromise? I see that the Zerex OG is actually available in a 5 year formula. Cnc machine services near me, Lift kit store near me, Aladdin resort las vegas. in order to prevent the "jelling" of the coolant. So then it's down to how certain I am that every drop of Dexcool can come out of every nook and cranny in the engine, radiator, heater core, hoses, etc. It seems like many of the Dexcool problems have been with systems not designed for it. Plus it was not designed for it as far as fluid flow and materials. But when I was in college Ive watched demonstrations of disassembled engines that had sludge built up in the coolant passages with dexcool at around 100,000 miles. From the reading I have done, and your inputs, it seems like the old-style Green was a fast acting antifreeze/coolant and that is why it needed to be changed every 2-3 years, while the newer OAT takes much long to be effective (the attached article said thousands of miles.) Well, I am talking about a 1966 Mustang that is only driven several hundreds of miles a year, so for that reason I am hesitant to keep it in the system. Legacy’s CCAM software allows you to take full advantage of Legacy’s exclusive 5-axis turning capabilities and simplifies the programming process. So my choices seem to be: keep the orange Dexcool, or use Zerex Original Green, Zerex G40 Si-OAT, G-05 HOAT, Prestone Yellow. Legacy’s exclusive 5-axis turning center allows you to turn round or multi-sided components that feature beads, coves, flutes, reeds, rope twist hollow spiral, carvings, joinery, and much more. ![]() As I see, it is a complicated issue with lots of opinions and real world experiences. Thank you to everyone for your time to reply. Is this what's SUPPOSED to be in these engines I bought this car from a branch of a local GM dealer, who serviced it before putting it on t. To shows, Cars & Coffees, on nice weekends and it is stored over the winter (December through March) OK, in my meanderings around with my HG issue on my '97 Legacy, I've discovered that it was running DexCool coolant. Take a middle of the road approach and put in a HOAT coolant which seems to be compatible with both the green IAT and the OAT/Dexcool coolants if not all of it is flushed out? Minimize the risk of congealing but maybe not eliminate it? Flush it out as best as I can and go with green and take a chance that not all of Dexcool is out of the system? Take a risk that it would congeal into jello? 3. Just stick with the Dexcool and don't worry about it? 2. Why did I want the older IAT type? Well I had heard and read a lot of bad things about Dexcool and all OAT coolants in systems not designed for them, and I figured that the safest bet would be the old-style green the car was engineered for. The shop filled it with a Dexcool OAT Havoline orange colored coolant when I asked for the IAT older type green. I had major work done to my 1966 Mustang powertrain Basically engine rebuild, new radiator, heater core, hoses, etc.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |